IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
RG-1500CNC
| Previous | 1 / 45 | Next |
| SCRIPTION | UNIT | RG-1500CNC | |
| General Capacity | Table size (lxw) | mm | 400x1500 |
| Max.grinding length (Chuck surface) | mm | 1500 | |
| Max.grinding width (Chuck surface) | mm | 400 | |
| Distance from table surface to spindle center | mm | 500 | |
| Std. Magnetic Chuck size | mm | 400x1500 | |
| Vertical Downfeed | Infeed Travel | mm | 300 |
| Ballscrew Per Revolution | mm | 10 | |
| Hand Feed Per Revolution | - |
x1, x10, x100 0.001, 0.01, 0.1 /MPG |
|
| Rapid traverse | m/min | 2000 | |
| Longitudinal Movement | Infeed Travel | mm | 1500 |
| Ballscrew Per Revolution | mm | 10 | |
| Hand Feed Per Revolution | - |
x1, x10, x100 0.001, 0.01, 0.1 /MPG |
|
| Rapid traverse | m/min | 3 | |
| Cross Movement | Infeed Travel | mm | 400 |
| Ballscrew Per Revolution | mm | 20 | |
| Hand Feed Per Revolution | - |
x1, x10, x100 0.001, 0.01, 0.1 /MPG |
|
| Rapid traverse | m/min | 10 | |
| Grinding Wheel | Wheel Size (OD x W x Bore) | mm |
Ø405x50x127 OPT Ø405x75x127 |
| Spindle Speed(50/60Hz) | rpm | 1450/1750 | |
| Motor | Spindle Motor | HP | 25 |
| Guideway Lubrication Motor | W | 25x3 | |
| Coolant Motor | HP | 2HPx2pcs | |
| Oil & Mist Chiller | HP | 2 | |
| Coolant Tank Chiller | HP | 2 | |
| Roller Dressing Motor | KW | 1 | |
| X Axis Motor | KW | 4.5 | |
| Y Axis Motor | KW | 3.5 | |
| Z Axis Motor | KW | 7 | |
| Weight | Net Weight / Gross Weight | kg | 18500/20000 |