IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
A12
| Previous | 2 / 9 | Next |
| Model | Unit | A12 | |
| Spindle | Spindle Taper | No. 40 / 50 | |
| Transmission | Belt | ||
| Spindle Speed | r.p.m. | 8,000 | |
| Spindle Diameter | mm | 150(BT40) / 190(BT50) | |
| Table | Table Size | mm | 1,350 x 700 |
| T-Slot Size | mm | 5 x 18 x125 | |
| Max. Table Load | kgs | 1,200 | |
| Travel & Feedrate | X Axis | mm | 1,200 |
| Y Axis | mm | 700 | |
| Z Axis | mm | 700 | |
| Distance from Spindle Nose to Table | mm | 120~820 | |
| Distance from Spindle Center to Column Ways | mm | 820 | |
| Rapid Traverse | m/min |
X, Y:32 Z:24 |
|
| Cutting Feedrate | mm/min | X, Y, Z : 1~10,000 | |
| ATC | Tool Shank | BT40 / BT50 | |
| Pull Stud | MAS P40 / 50T-1(45º) | ||
| Magazine Capacity | 24 Tool(standard) | ||
|
Max. Tool Diameter (Full Storage) |
mm |
Ø80 Ø125 (BT40) Ø125 Ø250 (BT50) |
|
| Max. Tool Length | mm | 300 | |
| Max. Tool Weight | kgs | 6 (BT40) / 15 (BT50) | |
| ATC Type | Arm Type(std.) | ||
| Motor | Spindle(Cont./30min.) | kw(HP) |
7.5/11(10/15) BT40 11/15(15/20) BT50 |
| X/Y/Z Axes(Fanuc) | kw(HP) | 4/4/7 (5/5/10) | |
| Misc. | Machine Height | mm | 3,200 |
| Floor Space | mm | 3,600 x 3,350 | |
| Machine Weight | kgs(lbs) | 8,450 | |
| Controller | OiMF |