IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+607-330 5686

Chncit JN-NV900

Previous 1 / 2 Next

Chncit JN-NV900 Chncit


  Model Unit JN-NV900
Spindle Tool Shank - BT40
Speed rpm 10000 (come with oil cooler)
Transmission - Direct
Bearing lubrication - Grease
Cooling System - Oil cooled / water cooled
Spindle motor max.rating KW(HP) 11(15)
Axis motor max.rating (MITSUBISHI) KW 2.5/2.5/3.0
Axis motor max.rating (FANUC) KW 3.0/3.0/3.0
Table Working area mm(inch) 1000*500(39.4*19.7)
Max.loading kg 700
T-slots (No.*Width*Pitch) mm (inch) 5*18*125(5*0.8*5.0)
Travel X axis mm (inch) 900(35.4)
Y axis mm (inch) 500/625(19.7/24.6)
Z axis mm (inch) 500(19.7)
Spindle nose to table mm (inch) 150-650(5.9-25.6)
Spindle centre to solid column surface mm (inch) 517/630(20.4/24.8)
Feed Rates Rapids on X/Y/Z axis m/min 36/36/36
Max.Cutting Feedrate m/min 10/10/10
Tool Magazine Tool storage capacity pcs 24/30
Type of tool (optional) type BT40
Max.tool diameter mm(inch) 85(3.3)arm
Max.tool weight kg 7
Max.tool length mm(inch) 300(11.8)arm
Avg.chan ging time (ARM) Tool to tool Sec 2.5
Air source required kg/cm2 6 up
Accuracy Positioning (VDI3341) mm (inch) 0.01(0.0004)
repeatability mm (inch) 0.005(0.0002)
Dimension Machine weight kg 6000
Power source required KVA 25
Shipping Floor Plan (L*W*H) water tank and chip conveyor not included mm (inch) 2600*2300*2600(102.4*90.6*102.4)
Floor plan (L*W*H) mm (inch) 3468*2282*2618*(136.5*89.8*103.1)
 
 
•Specification is subject to change without further notice.
 
 
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   

Switch to Mobile Version