IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
NEX-108
| Previous | 5 / 41 | Next |
| ITEMS | UNIT | NEX-108 | |
| CAPACITY | Swing Over Bed | mm | 400 |
| Swing on Cross Slide | mm | 320 | |
| Max Swing (on front door) | mm | 480 | |
| Standard Turning Dia | mm | 210 | |
| Max Turning Dia | mm | 320 | |
| Max Turning Length | mm | 481 | |
| Bar Capacity | mm | 52 | |
| TRAVEL | X-Axis Travel | mm | 180 |
| Z-Axis Travel | mm | 530 | |
| SPINDLE | Spindle Speed | Rpm | 4,000 |
| Chuck Size | 8” | ||
| Spindle Nose | A2-6 | ||
| Spindle Through Hole Dia | Mm | 63 | |
| Spindle Bearing Diameter | mm | 100 | |
| Spindle No | 1 | ||
| TURRET | Turret No | 1 | |
| Type of Turret | T12 | ||
| Height of Square Tool | mm | 25 | |
| TAILSTOCK | Stroke of Tailstock | mm | 435 |
| Tailstock Shaft Hole Dia | mm | 75 | |
| Taper Of Tailstock | MT.4 | ||
| Stroke of Tailstock Shaft | mm | 100 | |
| FEEDRATE | X-Axis Rapid Traverse Rate | m / min | 20 |
| Z-Axis Rapid Traverse Rate | m / min | 24 | |
| MOTOR | Spindle Drive Motor | kw | 7.5/11 |
| X Axis Drive Motor | kw | 1.2 | |
| Z Axis Drive Motor | kw | 2.5 | |
| POWER | Electric | kva | 21 |
| TANK | Hydraulic | L(kw) | 40(1.5) |
| Coolant Tank | L(kw) | 200(0.4) | |
| Lubrication | L(kw) | 2(0.004) | |
| SIZE | Height | mm | 1,815 |
| Width | mm | 1,690 | |
| Length | mm | 2,190 | |
| Weight | kg | 3,800 |