IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
VMC-2210
| Previous | 9 / 9 | Next |
| Model | VMC-1910 | VMC-2210 | |
| Spindle | Spindle Taper | No. 50 | |
| Transmission | Belt/Gear | ||
| Spindle Speed | 8,000/6,000 r.p.m. | ||
| Table | Table Size |
2,100mm x 1,000mm (82.68" x 39.37")Std. 2,100mm x 900mm (82.68" x 35.43")Opt. |
2,400mm x 1,000mm (94.49" x 39.37")Std. 2,400mm x 900mm (94.49" x 35.43")Opt. |
| T-Slot Size |
18mm x 7 x 150mm (0.71" x 7 x 5.91")Std. 18mm x 6 x 150mm (0.71" x 6 x 5.91")Opt. |
||
| Work Area |
1,900mm x 1,000mm (74.80" x 39.37")Std. 1,900mm x 900mm (74.80" x 35.43")Opt. |
2,200mm x 1,000mm (86.61" x 39.37")Std. 2,200mm x 900mm (86.61" x 35.43")Opt. |
|
| Max. Table Load | 3,000kgs (6,600 lbs) | 4,000kgs (8,800 lbs) | |
| Travel & Feedrate | X Axis | 1,900mm (74.80") | 2,200mm (86.61") |
| Y Axis | 1,000mm(39.37")Std./ 900mm (35.43")Opt. | ||
| Z Axis | 800mm (31.50") | ||
| Distance from Spindle Nose to Table |
150~950mm (5.91"~37.40")
|
||
| Distance from Spindle Center to Column Ways | 1,100mm(43.31")Std./980mm (38.58")Opt. | ||
| Rapid Traverse |
X, Y =12 M/Min (590 IPM) Z=10 M/Min (393 IPM) |
||
| Cutting Feedrate | X, Y, Z: 1~10,000mm/min (393 IPM) | ||
| ATC | Tool Shank | BT/CAT-50 | |
| Pull Stud | MAS P50T-1(45º) | ||
| Magazine Capacity | 32 Tools | ||
|
Max. Tool Diameter (with adjacent pocket empty) |
Ø250mm(9.84") | ||
| Max. Tool Diameter (full storage) | Ø125mm(4.92") | ||
| Max. Tool Length | 300mm (11.81") | ||
| Max. Tool Weight | 15kgs (33 lbs) | ||
| ATC Type | Cam Driven Arm Type | ||
| Motor | Spindle(Cont./30min.) |
18.5/22Kw (25/30 HP) Belt 15/18.5Kw (20/25 HP) Gear |
|
| X/Y/Z Axes(Fanuc) | 7Kw (9.33 HP) | ||
| Lubrication Pump | 0.025Kw (0.033 HP) | ||
| Coolant Pump | 0.49Kw (0.66 HP) | ||
| Misc. | Machine Height |
3,600mm (142")
|
|
| Floor Space |
5,100mm x 3,900mm
(201" x 154") |
5,700mm x 3,900mm
(225" x 154") |
|
| Machine Weight |
18,000kgs (39,600 lbs)
|
20,000kgs (44,000 lbs)
|
|
| Control |
Fanuc 0iMD
|
||
|
•Specification is subject to change without further notice. |