IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
A-14
| Previous | 3 / 9 | Next |
A-14
High-Rigidity Structure
High-Rigidity Structure
| Model |
|
Unit | A-14 |
| Spindle | Spindle Taper | No. 40 | |
| Transmission | Belt | ||
| Spindle Speed | r.p.m. | P8,000 (BT40) | |
| Spindle Diameter | mm | 150 (BT40) | |
| Table | Table Size | mm | 1,550 x 700 |
| T-Slot Size | mm | 5 x 18 x 125 | |
| Max. Table Load | kgs(lbs) | 1,400 | |
| Travel & Feedrate | X Axis | mm | 1,400 |
| Y Axis | mm | 700 | |
| Z Axis | mm | 700 | |
| Distance from Spindle Nose to Table | mm | 120~820 | |
| Distance from Spindle Center to Column Ways | mm | 820 | |
| Rapid Traverse | m/min |
X, Y:32
Z:24
|
|
| Cutting Feedrate | mm/min | X, Y, Z:1~10,000 | |
| ATC | Tool Shank | BT 40 | |
| Pull Stud | MAS P40T-1(45º) | ||
| Magazine Capacity | pcs | 24 | |
|
Max. Tool Diameter (with adjacent pocket empty) |
mm | Ø80 | |
| Max. Tool Length | mm | 300 (11.81") | |
| Max. Tool Weight | kgs(lbs) | 6 | |
| ATC Type | Arm Type | ||
| Motor | Spindle(Cont./30min.) | kw(HP) | 7.5/11(10/15) |
| X/Y/Z Axes(Fanuc) | kw | 4/7/7 | |
| Ball Screw | X Axis | Ø45/P12/C3 | |
| Y Axis | Ø45/P12/C3 | ||
| Z Axis | Ø45/P12/C3 | ||
| Triaxial Bearings | 35TAC72B(4/2) | ||
| Three Axes Linear Guide Way | X Axis | 45mm Width Roller Linear Guideways/ 3 Slider / 2 Track | |
| Y Axis | 45mm Width Roller Linear Guideways/ 2 Slider / 4 Track | ||
| Z Axis | 45mm Width Roller Linear Guideways/ 3 Slider / 2 Track | ||
| Misc. | Machine Height | mm | 3,200 |
| Floor Space | mm | 3,800 x 3,350 | |
| Machine Weight | kgs(lbs) | 8,650 | |
| Control | FANUC 0iMD |
| •Specification is subject to change without further notice. |