IPM TECHNOLOGY SDN BHD
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
17, Jalan Riang 20,
Kawasan Perindustrian
Taman Gembira,
81200, Johor Bahru,
Johor, Malaysia.
+607-333 6011/6012/6013
+6012-603 6003
+6016-710 6015
+6012-603 6003
+6016-710 6015
+607-330 5686
A-10L
| Previous | 1 / 9 | Next |
A-10L
High-Rigidity Structure
High-Rigidity Structure
| Model | Unit | A-10L | |
| Spindle | Spindle Taper | No. 40 | |
| Transmission | Belt | ||
| Spindle Speed | r.p.m. | 8,000 | |
| Spindle Diameter | mm | 150 | |
| Table | Table Size | mm | 1,200 x 600 |
| T-Slot Size | mm | 18 x 5 x100 | |
| Work Area | mm | 1,020 x 600 | |
| Max. Table Load | kgs(lbs) | 700 (1,543) | |
| Travel & Feedrate | X Axis | mm | 1,020 |
| Y Axis | mm | 600 | |
| Z Axis | mm | 600 | |
| Distance from Spindle Nose to Table | mm | 150~750 | |
| Distance from Spindle Center to Column Ways | mm | 655 | |
| Rapid Traverse | m/min |
X, Y:32
Z:28
|
|
| Cutting Feedrate | mm/min | X, Y, Z:1~12,000 | |
| ATC | Tool Shank | BT 40 | |
| Pull Stud | MAS P40T-1(45º) | ||
| Magazine Capacity | 24 Tool(standard) | ||
|
Max. Tool Diameter (with adjacent pocket empty) |
mm | Ø80 | |
| Max. Tool Length | mm | 300 (11.81") | |
| Max. Tool Weight | kgs(lbs) | 7 (15.4) | |
| ATC Type | Arm Type(std.) | ||
| Motor | Spindle(Cont./30min.) | kw(HP) | 7.5/11(10/15) |
| X/Y/Z Axes(Fanuc) | kw(HP) | 3/3/7 (4/4/10) | |
| For Ctting | HP | 0.86 | |
| Misc. | Machine Height | mm | 3,085 |
| Floor Space | mm | 2,800 x 2,736 | |
| Machine Weight | kgs(lbs) | 7,000 | |
| Control | FANUC 0iMD |
| •Specification is subject to change without further notice. |